ZL Vibrating fluid bed dryer is a new type of drying equipment, the system is composed of vibration fluidized bed, hot air system, cold air system, blower, dust collection system, and an operation monitoring and control system.
ZLZ 0860 Vibrating fluid bed dryer has the characteristics of high efficiency, energy saving, and excellent performance. By changing the vibration parameters of the vibrating conveying fluidized bed, such as the vibration amplitude, vibration frequency or vibration angle, the residence time of the material can be flexibly controlled, so that the temperature and moisture content of the material can be accurately controlled.
1. The object is heated uniformly, the heat exchange is sufficient, and the drying intensity is high.
2. The vibration source is driven by a vibration motor, which has balanced operation and convenient maintenance.
3. The fluidization is uniform, no dead space and blow-through phenomenon, and uniform dry, cooling and humidifying products can be obtained.
4. Good adjustability, wide adaptable surface, material layer thickness, moving speed inside the machine, and full amplitude change can realize stepless adjustment.
5. It has little damage to the surface of the material, and can be used for drying fragile materials. The irregularity of the material particles will not affect the work effect.
6. It adopts a fully enclosed structure, which effectively prevents cross infection of materials and outside air, and the operating environment is clean.
The ZLZ 0860 Vibrating fluid bed dryer consists of vibrating fluidized bed, hot air system, cold air system, blower, dust collection system, and operation monitoring and control system.
The vibration fluidized bed is to increase the vibration of the bed on the basis of the fluidization of the material, so that the material has a process of throwing and loosening. The two are organically combined to achieve the effect of low bed fluidization. It differs from traditional fluidized bed dryers in that the material conveyance and fluidization of ordinary fluidized bed dryers are completely completed by wind (hot air), while vibration fluidized bed dryers are mainly completed by vibration force. The minimum fluidization speed of the material can be reduced, especially the particles near the bottom are fluidized first, which improves the fluidization quality of the particles at the bottom, and enables some materials that are difficult to be fluidized to perform normal drying operations.
|Model||Overall dimensionsL×W×H（mm）||Fluidized bed sizeL×W×H（mm）||Fluidized bed power（kW）|
ZLZ 0860 Vibrating fluid bed dryer is used for drying, cooling and other operations of powdery, silky and granular materials. It is widely used in chemical, pharmaceutical, food processing, sugar, seed, tobacco, paper, plastic, synthetic fiber, Compound fertilizer and other industries.
Installation and use:
Any abnormal phenomena (such as vibration, sharp noise, and excessive temperature rise) during the operation of the equipment should be stopped immediately and checked until the cause is found and eliminated. If necessary, please contact the company. The equipment cleaning process may involve live parts, chemical carcasses or high temperature carcasses. Please follow the instructions in the product’s instruction manual to avoid electric shock, bumps or falls.
The control system of ZLZ 0860 Vibrating fluid bed dryer can be set with hot and cold air temperature, pressure sensor and infrared moisture detector at the discharge end according to the needs, to achieve dynamic and automatic control of the entire system and improve the stability of material quality.