ZL vibrating fluidized bed dryer is an enhanced drying device with special purpose, which is suitable for drying granular and powder materials. In addition to having a good drying function, this equipment can also be equipped with materials such as granulation, cooling, screening and conveying according to the needs of the process.
Vibrating fluidized bed is a new type of fluidized and efficient drying equipment suitable for drying granular and powder materials. It has the advantages of easy operation, energy saving and environmental protection.
1. The vibration source is driven by a vibration motor, which runs smoothly, easy maintenance, low noise, long life and easy maintenance.
2. High thermal efficiency, can save more than 30% of energy compared with general drying equipment. The temperature distribution of the bed is uniform, there is no local overheating, the fluidization is uniform, and there is no dead angle.
3. It has good adjustability and wide adaptability. The thickness of the material layer, the moving speed in the machine and the full amplitude change can be adjusted steplessly.
4. The damage to the surface of the material is small, and it can be used for drying fragile materials; the irregularity of the material particles will not affect the work effect.
5. It adopts a fully enclosed structure, which effectively prevents the air fork between the material and the air from infecting the operating environment to be cleaned.
6. When used for mass production of high-moisture materials, multiple units can be connected in series to meet user requirements (typical materials: such as polyacrylamide, etc.).
The ZLZ 1560 Vibrating fluid bed dryer consists of vibrating fluidized bed, hot air system, cold air system, blower, dust collection system, and operation monitoring and control system.
Vibrating fluidized bed, the material enters the machine from the feed inlet. Under the action of vibration force, the material is thrown along the horizontal fluidized bed and moves forward continuously. The hot air passes through the fluidized bed and exchanges with the wet material. The cyclone separator is discharged by the exhaust air 1: 3 after dust removal. The dry material is discharged from the discharge inlet.
|Model||Overall dimensionsL×W×H（mm）||Fluidized bed sizeL×W×H（mm）||Fluidized bed power（kW）|
ZLZ 1560 Vibrating fluid bed dryer is widely used in chemical industry, light industry, medicine, food, plastic, grain and oil, slag, salt making, sugar and other industries to dry, cool and humidify powder and granular materials.
Installation and use:
Any abnormal phenomena (such as vibration, sharp noise, and excessive temperature rise) during the operation of the equipment should be stopped immediately and checked until the cause is found and eliminated. If necessary, please contact the company. The equipment cleaning process may involve live parts, chemical carcasses or high temperature carcasses. Please follow the instructions in the product’s instruction manual to avoid electric shock, bumps or falls.
The control system of ZLZ 1560 Vibrating fluid bed dryer can be set with hot and cold air temperature, pressure sensor and infrared moisture detector at the discharge end according to the needs, to achieve dynamic and automatic control of the entire system and improve the stability of material quality.