FZS400-80-1000 simplex body connecting rod vibration conveyor is a short distance conveyor with a small width of the trough. Its productivity per hour is designed to be 80 cubic meters, the maximum rated length is 10 meters, and the width of the trough is 0.4 meters.
FZS400-80-1000 simplex body connecting rod vibration conveyor has good sealing performance, conveys dusty, toxic and volatile materials without pollution to the environment, and can realize multi-point feeding and multi-point discharging.
⑴FZS400-30-1000 simplex body connecting rod vibration conveyor structure is simple, compact, less lubrication points and lubrication points are not in contact with the material, no special installation requirements, it is easy to install, low maintenance workload.
⑵ Good sealing performance, conveying dust resistance, toxic, volatile material on environmental pollution, and multi-point and multi-point discharge feed.
⑶ Resonance due to the use of the principle of mechanical vibration to learn, low power consumption, power consumption is the same length than the same transport conveyor screw conveyor productivity half less.
⑷ Material during transportation due to jump ahead run in a parabolic trajectory, so the machine groove wear slight increase three times more life than screw conveyor.
⑸ Operating noise is not more than 75Db (V).
⑹FZS single plastid rod vibrating conveyor capable of frequent starts and long-term continuous operation at rated amplitude condition.
|FZS400-30-1000 simplex body connecting rod vibration conveyor|
|Model||Productivity( m³/H)||Trough width(mm)||Trough lengh(mm)||Motor Power(Kw)||Weight（kg）||Dimensions|
|Middle section（kg/m）||Drive section（kg/m）||Width（mm）||Height（mm）|
|Remarks: For the explanation of model FZS400-30-1000, the first number refers to the slot width, the second number refers to the productivity, and the third number refers to the slot length.|
FZS400-80-1000 simplex body connecting rod vibration conveyor is composed of conveying trough, main vibration plate spring, driving mechanism, connecting rod, connecting rod coil spring, chassis, etc.
FZS400-80-1000 simplex body connecting rod vibration conveyor is suitable for fine powder materials that are difficult to convey, such as fly ash, cement, carbon powder, coal powder, emery.
During the use of FZS400-80-1000 simplex body connecting rod vibration conveyor, it is necessary to regularly fill the drive mechanism bearing seat and the connecting rod bearing with grease (No. 3 calcium-based grease). Filling once every two weeks for continuous operation and once every month for non-continuous operation. Frequently check the tightening of each fastener, and replace the wearing parts (leaf spring, Spiral springs, rubber springs, and fasteners). It is strictly forbidden to run with disease. Pay attention to check the temperature rise (feel) of the bearing part of the drive mechanism. If any abnormal phenomenon is found, you must immediately stop the inspection and handle it.