NE type bucket elevator

Uses and Features

NE-type bucket elevator which is producted by Nantong Lianzhen Heavy Machinery for plate chain, gravity-induced discharge of lifting equipment. NE-type bucket elevator for vertical conveying powder, granular, small block, abrasive or non-abrasive materials, such as raw materials, cement, coal, limestone, dry clay, clinker and so on.
NE-type bucket elevator comparison with other hoist, which is characterized by:
1, NE-type bucket elevator plate chain machine has a higher shear strength, fatigue strength and wear resistance, running low failure rate, long service life;
2, NE-type bucket elevator chain using low speed (0.5 m / s);
3, NE-type bucket elevator bucket using a large hopper capacity and a smaller pitch, drive power is low and transmission capacity. NE-type bucket elevator is particularly adapted to enhance the limestone and cement clinker after crushing (≥NE50)
 

Specifications Performance

Modeldelivery capacity/m3/hBucket speed/m/sSpindle speed/r/minParticle size/mmHopperUnit weight/kg/m
Volume/LBucket widthmmBucket spacing/mm
NE15150.515.54﹤402.525020327.5
NE323216.45﹤507.830030535
NE506016.45﹤5015.730030564
NE10011014.13﹤703540040089
NE15017014.13﹤7052.2600400112.3
NE20021010.9﹤10084.6600500134
NE30032010.9﹤100127.5600500188
NE4003808.3﹤120182.5700600205
NE5004707.1﹤120260.9700700223
NE6006007.1﹤120330.2700700274
NE8008006.2﹤140501.8800800313

Note: The table when upgrading transmission capacity for powdered materials, hopper full coefficient ψ = 0.7 calculated. When used to enhance the granular material, table transmission capacity × 0.75; ascension small bulk materials, sheet conveying capacity × 0.6