PSL300-18-8000 fully balanced vibrating conveyor is a short-distance conveyor with a small width of the trough. It is designed to transport 18 tons per hour, and the maximum rated length is 8 meters. The width of the trough 0.3 meters.
PSL300-18-8000 fully balanced vibrating conveyor has a simple structure, few lubrication parts, easy installation and adjustment, less maintenance work, low energy consumption, safe operation, and easy automatic control.
PSL300-18-8000 type fully balanced vibrating conveyor can realize multi-point feeding and multi-point discharging during transportation.
PSL300-18-8000 type fully balanced vibrating conveyor has good sealing performance, the conveying trough body can be made into a rectangle or a circle, and the inlet and outlet ports are flexibly sealed.
|PSL300-18-8000 type fully balanced vibrating conveyor|
|Model||Conveying capacity (T / H)||Conveying trough width (mm)||Conveying trough length (mm)||Motor power (Kw)|
|Remarks：1. The calculation of the transportation volume is calculated according to the horizontal transportation of river sand (heap density 1.6t/m3, water content 5%).2. The power of the tank body should be recalculated when installing the sealing cover, the lining plate and conveying the materials of different bulk density.3. When the conveying distance exceeds 15 meters, the segmented structure is adopted, and the site is assembled and connected.4.For the explanation of model PSL300-18-8000, the first number refers to the slot width, the second number refers to the conveying capacity, and the third number refers to the slot length.|
PSL300-18-8000 fully balanced vibrating conveyor, the lower balance structure can completely balance the reaction force of the upper tank to prevent the unbalanced reaction force caused by the materials on the tank or other reasons, and can be re-opened through the shock absorber spring balance.
PSL300-18-8000 fully balanced vibrating conveyor is suitable for many industries, including biomass, recycling, pellet manufacturing, sawmills, plywood, OSB, food processing, and agriculture.
During the use of the vibrating conveyor, it is necessary to regularly apply grease (No. 3 calcium-based grease) to the bearing housing and the connecting rod bearing of the drive mechanism.
Continuous operation is repeated every two weeks, and non-continuous operation is filled once a month.
Always check the fastening of each fastener and replace consumables (plate springs, coil springs, rubber springs and fasteners) for long-term damage (fatigue, defects, aging wear).
It is strictly forbidden to operate with illness.
Pay attention to check the temperature rise (feel) of the bearing part of the drive mechanism
If an abnormality is found, it must be stopped immediately for inspection.