Motor vibration feeder


        Motor vibrating feeder is a kind of linear direction feeding equipment. It features smooth vibrating, reliable operation, long service life and being suitable for feeding. Vibrating feeders are widely used in mining, building-material, silicate andchemical industry in the crushing and screening plants.In the sand-stone production line, vibrating feeder can send materials to crusher evenly and continuously and at the same time, it can screen materials roughly。

Vibratory Feeder
Vibratory Feeder


motor vibration feeder Through driving the vibrating motor or two motors,it engenders a specific exciting force,which drives vibrating frame to make periodic linear and reciprocal vibrationalong the inclined direction. When the vibrating accelerated speed of vertical component of vibrating frame is larger than gravity accelerated speed, materials are throwed up and move forward along a parabolic path,throwing up and falling down are completed in a flash.


1. Using the self-synchronization principle of special vibration motor, the starting is quick, the work is stable, and the parking is stable.

2. The material continuously jumps forward according to the parabola trajectory, so the feed groove wears less.

3. Since the flow can be changed and opened and closed instantaneously, the feed amount has a high precision.


1. Stable vibration and reliable operation;

2. Convenient and stable adjustment;

3. Vibration motor as vibration source,low noise and small power consumption;

4. Simple structure and easy maintenance。

Vibratory Feeder
GZG Vibratory Feeder


The vibrating feeder is composed of a feeding trough body, a vibration exciter, a spring bearing, a transmission device and the like. 

Vibrating Feeder Working priciple:

        The vibrating motors force the feeding trough body to make simple harmonic vibration or similar to simple harmonic vibration in a certain direction. When the acceleration of its vibration achieves some certain value, the materials will make continuous and small throws or slides along the transmission direction in the feeding trough body, which causes the forward motion and transmission of the materials.


        GZG series vibration feeder is widely used in mining, metallurgy,coal,construction, light industry, chemical industry,electric power, food and other industries.

Vibratory Feeder
GZG Vibratory Feeder

How to use:

1. The vibrating feeder should have a horizontal clearance of 20mm after installation, and the suspension device should be connected flexibly.

2. Before the empty test, all bolts should be tightened once, especially the anchor bolts of the vibration motor. It should be tightened once for 3-5 hours.

3. When the test is started, the two vibration motors must rotate in the opposite direction, and the stability of current and noise should be stopped in time.

4. The motor bearing is filled with grease once every 2 months, and the lubricating oil should be filled once a month during the high temperature season.


(1) Check whether the condition of the machine and the transmission part is normal before it can start;

(2) must be started without load;

(3) After starting, if abnormal situation is found, it should stop immediately, to be identified and ruled out the exception before starting again.

(4)Only when the machine has has stable vibration can it run with material.

(5) The feeding should meet the requirements of the load test;

(6)Shutdowns should be carried out in the process order, and no with material shutdowns are prohibited.

Vibration Conveyor