K type reciprocating feeder for coal or other abrasive, adhesive small loose granular granular material feeding, the storage silo or pit the material in the continuous evenly unloaded into transport equipment or other screening equipment.
K-type reciprocating feeder is composed of the rack, floor (to the trough), transmission platform, the number one drain, gate and roller. When the motor is activated by the flexible coupling, reducer and Crank, which will drag bottom floor tilted 5 degrees doing linear reciprocating motion and make materials unload other devices evently.The machine can be equipped with a funnel or without funnel forms according to the customer’s requirement .
Reciprocating vibratory feeder tray mounted on the standard steel channel fabricated frame at an inclination of 5 to10 degrees for better feeding results
Adjustable reciprocating stroke length up to 300 mm. depending upon the size of lumps
Substantial width of tray to accommodate large lumps of material to be feed
Tray and side walls lined with wear resistant plate for longer life
High capacity model designed with twin eccentric disc as well as crank-lever mechanism
Reciprocating feeder is ideal for sand, gravel, and recycle applications or in portable plants where the rugged durability of the feeder aides in the crusher discharge.
The Universal Engineering Reciprocating feeder is built in a range of sizes and types for shovel or dragline loading, ramp loading, or bulldozing to trap.
It is available in varying widths and lengths to fit your specific application.
Long service life
Convenient maintenance and maintenance
K-type Reciprocating Vibratory feeder is composed of the rack, floor (to the trough), transmission platform, the number one drain, gate and roller.
When the motor is activated by the flexible coupling, reducer and Crank, which will drag bottom floor tilted 5 degrees doing linear reciprocating motion and make materials unload other devices evently.The machine can be equipped with a funnel or without funnel forms according to the customer’s requirement.
K type reciprocating feeder contain frame, floor (for coal chute), transmission platform, number one, the gate leakage, roller, when the motor start, through the elastic coupling, speed reducer, connecting rod drag 5 degrees tilt plate as a straight line reciprocating movement on the roll, coal evenly discharged to other devices.
Suitable for mining, mine, coal preparation plant, transfer station, coal handling plant, port bulk terminal bulk material transfer.
|Feeding capacity(t/h)||Backplane trip||Crank position||Anthracite||Bitumite||Anthracite||Bitumite||Anthracite||Bitumite||Anthracite||Anthracite||Bitumite||Anthracite|
|Reducer||Type speed ratio||JZQ-350||JZQ-350||JZQ-350||JZQ-400||JZQ-500|
|Maximum Feed Size(mm)||Content below 10%||250||350||400||500||700|
|Content of more than 10%||200||300||350||450||550|
K type coal feeder by frame, floor (for coal chute), transmission platform, funnel, gate, roller and so on, when the motor start by the elastic coupling, reducer, crank even drag 5 ° of the tilt slab on roller linear reciprocating motion, coal evenly discharged to other devices.
This machine can use sets with funnel, without a funnel in two forms.
Coal feeder is equipped with two kinds of structure forms: 1, 2, without adjusting valve regulating valve, the feeding capacity by adjusting the valve to achieve.
There are two forms with funnel and without funnel of this machine.
Coal feeder is equipped with two kinds of structure forms:
With regulating gate
Without regulating gate,The feeding capacity is adjusted by the regulating gate.