Static Vibrating Screen

ZWS-type Static Vibrating Screen

UHM can build completely customized screen decks for static screens from our range of stainless steel wire braided mesh screening media. Its characteristic is that the excitation source is a vibration motor, and the screen box does not participate in the vibration, only the screen vibrates.

The vibrating system is designed to work in a near-resonance state, which can achieve the required working parameters with a small driving force and save energy.

In addition, the screen surface vibrates at high frequency, with an amplitude of 1-4mm, which can reach 8-10 times the acceleration of gravity, which is 2-4 times the vibration intensity of general screening equipment, so it does not block the screen holes, the screen surface has the strong self-cleaning ability, and the screening With high efficiency and large processing capacity, it is very suitable for the screening of fine particle materials, and the processing capacity of 4 square meters is about 200 tons.

The screening efficiency is within 60%, and if the concentration is adjusted properly, it can reach more than 80%.

Features of Static Vibrating Screen

The static vibrating screen has a small dynamic load, high frequency, low noise, adjustable amplitude, low power consumption, high screening efficiency, large processing capacity, good dust prevention measures, and convenient maintenance. It is suitable for the classification of non-metallic fine-grained materials.

Classification of Static Vibrating Screen

The vibrating screen of the ZWS-type static vibrating screen is double-layer (can also be made into a single layer), and the screen structure is stainless steel wire braided mesh. ZWS-type static vibrating screen with 5 specifications for each double layer, the most important thing is to produce three specifications of single and double vibrating screens.

Five Operation Precautions for ZWS-type Static Vibrating Screen

• Operation Precaution 1: When the Static Vibrating Screen is running, its vibrating part must not be connected or contacted with any object outside the machine.
• Operation Precaution 2: When feeding the material, it should be fed in the width direction of the entire sieve body at the feed inlet to ensure the uniform distribution of the material on the sieve surface. When the material falls, there must be no big impact, so as not to damage the screen.
• Operation Precaution 3: Before starting and stopping the Static Vibrating Screen, there must be no remaining materials on the screen.
• Operation Precaution 4: If there is an abnormal sound during the operation of the equipment, it should be shut down immediately for inspection, and the machine can be turned on after troubleshooting.
• Operation Precaution 5: The sieve grid should be taken out frequently, and regularly check whether the sieve surface is damaged or uneven, whether the sieve hole is blocked, etc.